ATP推拉式内径切管机

POWERMASTER “Push Type” Internal Tube Cutters quickly cuts through the walls of ferrous tubes in Condensers and Heat Exchangers as a step in their removal from the tube sheet.

POWERMASTER“推式”内部切管器快速切割冷凝器和热交换器中的铁管壁，作为从管板上拆除铁管的一个步骤。

This sturdy “Push Type” Internal Tube Cutters can be used with a portable Electric or Air Drill Motor.

这种坚固的“推式”内管切割机可与便携式电动或气钻电机配合使用。

“Push Type” Cutters are simple to operate. Merely insert it into the tube, apply power, press inward and the tube can be cut in a few seconds. Releasing of inward pressure automatically retracts the Cutter Bit. These Tube Cutters are equipped with an adjustable collar suitable for reaching into tubes at various depths.

“推式”刀具操作简单。只需将其插入管中，通电，向内按压，几秒钟内即可切断管。释放向内压力会自动收回刀头。这些切管机配备了一个可调节的套环，适合在不同深度下进入管道。

The replaceable cutting bit can be interchanged in a few seconds. Standard adjustable reach is 4”(101.6mm) and they are available in optional increments of 2”(50.8mm). “A” reach = 6”(152.4mm). “B” reach = 8”(203.2mm). “C” reach = 10”(254.0mm) etc.

可更换的切削钻头可以在几秒钟内互换。标准可调范围为4英寸（101.6毫米），可选增量为2英寸（50.8毫米）。“A”范围=6“（152.4mm）。“B”范围=8“（203.2mm）。“C”范围=10“（254.0mm）等。

All Tube Cutters come with a complete set of pilots covering the entire range of tube thickness for a particular tube O.D. (ATP-625 tube cutters come with a built in pilot suitable for one tube ID only.)

所有切管机均配有一套完整的导向器，覆盖特定管外径的整个管厚度范围。（ATP-625切管机配有一个内置导向器，仅适用于一个管ID。）

All Tube Cutters are available for MM tube sizes also. Please enquire.

所有管子切割机也可用于毫米管尺寸。请查询。

• 关键词: 切管机，换热管切管器，内径切管器